DESCRIPTION
Apply only to clean, dry surface at room temperature (65°- 85°F).
Do not apply to a hot surface. Be sure all pilot lights or other sources
of ignition are turned off. Remove all oil, dirt, wax, polish or grease
with a suitable solvent. Remove rust or glossy paint with fine sandpaper.
SURFACE
PREP
Stir Temproof 1200°F BBQ Grill and Stove Paint thoroughly
before and during application. Apply with a high quality brush, using
smooth even strokes. Maintain a wet surface edge to prevent lap marks.
Allow to dry two to four hours before applying a second coat. One coat
is usually sufficient for interior use. For exterior use, two coats
should be applied for maximum durability.
If you wish to apply paint by spraying, thin with mineral spirits or
paint thinner at the rate of one quart of thinner per gallon of paint.
Allow stove to dry 24 hours before applying heat. During the first firing
after painting, be sure to maintain proper ventilation.
COVERAGE
25-35 square feet per pint, depending on surface.
